epiphan video Standalone VGA Grid User Manual Download

Page: 202 / 319

Standalone VGA Grid User Guide

Record a channel via the web interface

Operating System

Tested Players

Mac OS

QuickTime 10.3 (for 1080p streams)

QuickTime 10.3 (for streams less than 1080p)

VLC 1.0.0+ (for all streams)

Windows

QuickTime 7.6.6+

VLC 2.1.5+

Windows Media player 12+ (except MOV files)

Linux

MPlayer

VLC 2.0.8+

Android

DICE 2.0.21

VLC 0.9.9+ (works only with MOV files that have no audio)

HTML 5 Browsers
(Windows)

Google Chrome 37+ (works with MOV and MP4 files using H.264 codec)

Record a channel via the web interface

Each channel has a configuration page that allows you to start, stop and configure recordings.

To start and stop channel recording:

1. Connect to the admin interface using your preferred connection mechanism. See

Connect to the admin

interface

2. Login as admin or operator.

3. Click the name of the desired channel; the channel menu expands.

202

Summary of Contents for Standalone VGA Grid
































































































































































































































































































































Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands

epiphan video Standalone VGA Grid, User Manual

Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands