Standalone VGA Grid User Guide
Change the channels recorded by a recorder
3. Click the
Add recorder
link from the Recorders section; a new recorder is created and the recorder
configuration page opens. By default this recorder uses the next available number and records all
channels.
Change the channels recorded by a recorder
By default when you create a new recorder, it records all the channels configured on the system. If new
channels are added, they are automatically added to the recorder.
If you wish to record a subset of channels to a single multi-track file, you can edit the channels recorded by a
recorder.
To change the channels recorded by a recorder:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
3. Select the desired recorder link from the Recorders section; the recorder configuration page opens.
4. Click
change
next to the list of what is currently being recorded.
209
