Standalone VGA Grid User Guide
AFU or copy to USB drive
For secure copy you can upload an SSH identity for your Standalone VGA Grid. This key
must be trusted by the destination server. Details for generating the key and setting up
this trust are beyond the scope of this document.
6. If desired, scroll down to the section labelled
SSH identity for SCP and SFTP clients
.
1. If no identity is uploaded, or to upload a new identity (overwrites the old identity):
a. Click
Choose File
; a file selection dialog opens.
b. Select the private key file from your hard drive and click
Open
.
The system accepts RSA keys for SSH-1; DSA, ECDSA, EC25519 and RSA for SSH-2.
Keys must be in
OpenSSH
format.
c. Click
Upload
to upload the file.
2. Use the
Test your key
field to test your uploaded key against the secure server, if desired.
7. Click
Apply
; if there are any problems the system notifies you with a message: One or more parameter
values are not valid and those were not applied!
The following table describes the options applicable to configuring upload using SCP.
Table 28
SCP Automatic Upload Configuration Options
Name
Description / Options
Server address The IP address (or fully qualified domain name) of the destination server.
Server port
The SCP port used by the target server. Standard port is 22.
Login
Username for the SFTP server.
Password
Password for the SFTP user.
AFU or copy to USB drive
The system is equipped with USB ports that can be used to copy files from internal storage to external USB
flash drives or hard drives. An example use of this feature is to provide speakers with a copy of their
presentation before they leave the presentation venue.
The external drive must be formatted with one of the following file systems:
l
FAT16
l
FAT32
l
XFS
l
EXT2
l
EXT3
l
EXT4
234
