Standalone VGA Grid User Guide
Step 6: Recording the stream
Step 6: Recording the stream
The stream is set up and broadcasting. This may be all you need, but if you like you can also record the
stream.
To record the stream:
1. From the web interface, scroll to the
Channels
section.
2. Click
Recording
for your channel; the Recording page is displayed.
3. Click the red
Start
button; the text at the top of the screen changes to indicate the recording is
starting, then indicates the length of time since the recording started.
4. Click the black
Stop
button; the recorder stops.
5. Refresh the page by clicking
Recording
again; the page reloads and a file list appears that shows your
newly recorded stream snippet.
6. Click the file name to download and view your recording.
What’s Next?
Now that you have a source set up and ready to stream, you can fine-tune the system to your exact
requirements. You can look at topics such as:
l
Add a video source (custom channel)
l
l
l
l
When you have completed system tuning, make sure to back up the system configuration using the
procedure described in:
l
Save and restore device configuration
Refer to the table of contents for a complete list of the topics covered.
26
