Standalone VGA Grid User Guide
Create a custom channel
pixels and percents changing only the boxes you want to use pixel values. At any time you can switch
back to percents by typing a percent.
Add an audio source (custom channel)
To stream the audio for a source you need to add it to a channel and make sure audio is enabled in the
channel's encoding page. (Audio is enabled in the encoding page by default.)
Audio must be added to each layout for your channel. You can use the same audio for each layout, or if you
desire, you can have different layouts use different audio. If you're not sure how to create a channel or a
layout, start by reviewing the first few steps in the topic
.
To add an audio source to your layout:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
Create a custom channel or layout
to get to the
channel layout editor.
4. Select the audio source(s) you want to add to your channel. Sources are mixed at equal levels. If you
have one source it's added at 100% its volume. With two audio sources, each is added at 50%, and so
on.
5. When your layout changes are complete, scroll to the bottom of the page and click
Save
to save your
work.
to ensure audio is enabled for your channel and to select
your audio settings.
Other things you may want to add to your layout:
92
