epiphan Pearl-2 Rackmount User Manual Download | Manualshive

Page: 360 / 497

background image

Pearl-2 User Guide

Play directly to a media player

UPnP can also be used to directly play a recording to the digital media player, or to set a media player to
automatically play a particular live stream after reboot of Pearl-2. See

Stream using UPnP

and

Play directly to

Play directly to a media player

If your digital media player is UPnP enabled, Pearl-2 can play direct the media player to play recorded files,
without browsing through menus in the player.

Recorded files must be in MPEG-TS format and use the supported codecs: H.264 with MP3 or AAC audio.

If a viewer password is configured, that could prevent the ability to use UPnP, see

Set or change user

.

To play directly to a media player:

1. Login to the Admin panel as

admin

, see

Connect to the Admin panel

2. Ensure

Share recorded files through UPnP

is enabled on your Pearl-2 and for the channel or

recorder you want to share, see

3. Open the recorded files list for the channel or recorder, see

View list of recorded files

4. From the list of files, select the file you want to play and click on the

Play To

icon for the file. A list of

visible digital media players is displayed.

5. Select a media player. The recording plays on the screen that is connected to the media player.

Auto-restart playback to a UPnP device

In unmanned situations such as industrial applications and digital signs, it is useful to automatically have a
stream played to a digital media player, even if Pearl-2 restarts.

To configure auto-restart of a stream to a media player:

1. Login to the Admin panel as

admin

, see

Connect to the Admin panel

3. From the Configuration menu, click

UPnP

. The UPnP configuration page opens.

4. In the Play on service start section, select a stream from the

Live stream

drop-down list.

5. Select a digital media player from the

Player

drop-down list. Digital media players on your network

that support UPnP playback appear automatically in the list.

6. Click

Apply

.

Only a single stream and player combination can be configured for auto play. The channel's UPnP
configuration must be enabled for it to appear.

347

«
...
358
359
360
361
362
...
»

Summary of Contents for Pearl-2 Rackmount


















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pearl-2 Rackmount

TruVision DVR 10

Brand: GE Pages: 6

Brand: Qvis Pages: 112

Brand: Yaesu Pages: 8

DLR-2104/1.0TBV

Brand: Eneo Pages: 90

Brand: SAFE-TECH Pages: 16

Brand: HIKVISION Pages: 95

Brand: Arirang Pages: 14

Brand: 2SAN Pages: 15

NViS 5604-SERIES

Brand: Nexcom Pages: 73

Brand: Blaupunkt Pages: 204

EVD-04/050A1MJN

Brand: Euro Video Pages: 47

Brand: Euro Video Pages: 82

Brand: Chipatronic Pages: 5

Brand: Wisenet Pages: 14

Brand: Wisenet Pages: 93

Brand: Digital ID View Pages: 56

Transcendent VT-TR8NHA Series

Brand: Vitek Pages: 8

Brand: Vitek Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands