Pearl User Guide
Perform disk check
2. Login as admin.
3. Select the
Disk Check
link in the Configuration menu; the disk maintenance page opens.
4. Set the
number of restarts to occur before the next check
. Set to 0 if you don’t want to force a
disk check after a specific number of restarts.
5. Set the
number of months to pass before the next check
. Set to 0 if you don’t want to force a
disk check after a specific number of months.
6. Click
Save
.
Perform disk check
A disk maintenance schedule is used to periodically check the system storage drives for errors. If you prefer,
you can run the disk check manually at a time that is convenient for you.
Running the disk check manually resets the timers for the scheduled disk check (i.e. next check won’t happen
automatically until either the number of restarts or months passes).
If the system is recording when you start a disk check, it will stop recording and resume after the
check is complete. Frames presented during the disk check are not part of any recording.
To start a manual disk check:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
3. Select the
Disk Check
link in the Configuration menu; the disk maintenance page opens.
4. Click the
Check Now
button; a new page opens showing you the progress of the disk check.
Do not interrupt power to the system during the disk check.
5. When the disk check is complete, the main page returns and a summary is shown.
6. If any unrecoverable errors are detected, contact Epiphan support.
294
