E
piphone Amplifiers are the result of years of extensive research and development by some of the music
industry’s finest musicians and engineers. For decades Epiphone has provided world class products to musicians
everywhere. The Epiphone name stands for quality and this product has been designed to provide years of lasting
musical pleasure.
FRONT PANEL
Your device is equipped with an external AC to DC power adaptor. First, plug the power adaptor’s small
cable end into the
Power IN
jack located on the back of the amplifier. Then plug the adaptor into your AC wall socket.
Turn the power switch to ON. The RED LED should light up indicating power is supplied.
1.
Input Jack
- Connect your guitar using a standard 1/4” instrument cable to this input. Connect the other
end of the cable to your guitar.
2.
Volume
- Adjusts the overall volume output of the amplifier
3.
Treble
- Controls the boost and cut of the upper frequencies. The treble control will make the sound brighter.
4.
Middle
- Controls the boost and cut of the mid-range frequencies.
5.
Bass
- Controls the boost and cut of the low frequencies. The bass control will make the sound darker.
6.
Power Switch
- Turns the AC Power on and off.
BACK PANEL
7.
Power In
- Input jack for external power adaptor. Plus power adaptor jack into here.
8.
Extension Speaker
- This is a standard 1/4” speaker cable output jack rated for 8 ohms. Use it to connect
an external speaker or speakers. When connected, the internal amplifier speaker is deactivated.
9.
Headphone Jack
- For connecting headphones with a mini 3.5mm stereo plug. Always turn the Volume
control to 0 BEFORE engaging headphones. When using the headphone jack, the speaker is disconnected
allowing for private listening.
10.
Line Out
- This is a standard 1/4” output jack for connecting the amplifier’s signal to a PA systemor
recording console or to connect the amplifier to another guitar amp. Use it to connect one amp to another to
create different tone colors or sound effects. Or use it to connect the amp directly to a PA system or recording
console without the tonal coloration produced from the internal speaker.
11.
Aux In
- This is a 3.5 mm input jack that allows you to connect external devices such as CD or MP3 players to
play through your amplifier’s speaker. Use it to play along with pre-recorded music.
T R O U B L E S H O O T I N G
NO SOUND - Power LED Indicator light is OFF
• Check if the
Power Switch
is ON.
• Make sure AC outlet is active by plugging into another electrical outlet.
• Is the AC cord from the amplifier properly plugged in?
NO SOUND - Power LED Indicator light is ON
• Make sure the
Volume
control is set past 3.
• All controls should be set above 3.
• Try a different instrument cord.
WARNING:
To prevent fire or electric shock, DO NOT expose this equipment to rain or moisture.
No user serviceable parts. Refer all repairs to an
Authorized Epiphone Warranty Center.
Your Epiphone Amplifier comes with a
Limited 3-Year Warranty
. Visit
www.epiphone.com
for details.
Void where prohibited.
ELECTAR-15B BASS
AMPLIFIER OWNERS MANUAL
S P E C I F I C A T I O N S
Output Power
15 Watts
Treble Control
+15dB/-15dB @ 60Hz
Treble Control
+15dB/-15dB @ 660Hz
Bass Control
+15dB/-15dB @ 6kHz
Input Sensitivity @ 1KHz
40mv
Input Impedance
1 megaohm
Headphone Jack
3.5mm
Aux In Jack
3.5mm
Extension Speaker
1/4” - 8 ohms
Speaker
10” - 8 ohms
Power Consumption
32 Watts
