26.01.07, SBS 32, Drills
Page 10 from 33
1.4.3 The operator must
The operator is bound to instruct the personnel in regular intervals (at
least once a year) on
Monitoring all safety standards that apply to the machine
Maintaining the operation
Obtaining accredited technical guide lines
Furthermore the operator is bound to:
Document training/ instructions
Require the staff to confirm participation in training/ instruction by
means of a signature
Control whether the personnel observes the operation manual
and whether it is close to the machine
Check that the staff is aware of safety and dangers in the
workplace and that they observe the operating manual
1.4.4 The user must
Observe commands of superiors and sentinels
Do not remove safety equipment during work
Avoid contact with tool
Use personal protective equipment (incl. Skin protection)
Wear close work wear
Remove chips with equipment and not by hand
Do not use damaged thread, wood, HSS drills
Work parts have to be clamped safe and feast
Assure order and cleanness at the work place
Never work with damaged machine parts
Announce defects directly to your superior
Read and understood the user manual
To be familiar with all safety regulations and safety arrangements
Use the machine
