background image

39

8. Warranty

The ePropulsion limited warranty is provided for the first end purchaser of an 

ePropulsion product. Consumers are entitled to a free repair or replacement 
of defective parts or parts which do not conform with the sales contract. 
This warranty operates in addition to your statutory rights under your local 
consumer law.

8.1 Warranty Policies

ePropulsion keeps its products free of defects in material and workmanship 
for a limited period since the date of purchase. Once a fault is discovered, 
the user has the right to make a warranty claim under the warranty policies 
of ePropulsion.

Product

Warranty Expiry Date

VAQUITA

One year 

after the date of purchase

Repaired

/

Replaced 

Parts

Three months

 since the date of maintenance.

Notes:
1. If the three-month period overlaps with the 
original product warranty period, the warranty 
against these replaced or repaired parts still expire 
one year after the date of purchase.
2. If the three-month period exceeds the original 
product warranty period, the repaired or replaced 
parts continue applying to warranty during the 
extended period.

In order to validate the warranty, users are required to fill in the Warranty 

Card in advance.

Keep the product label in an intact state and record the serial number on 
the label. Never tear the label off the product. An ePropulsion product 
without the original product label will not be applicable to warranty 
services provided by ePropulsion.

The warranty is valid only when the information on the Warranty Card is 

filled in correctly and completely.

Free warranty is only validated upon the presentation of legal serial 

Summary of Contents for VAQUITA















































Reviews: