15
Joiner Installation
Insert Lapel Strap through adjacent front side Valance Ring. Secure the side release buckle. Pull strap to
tighten.
3
From the outside of the tent, fasten both of the front Valances together with the Velcro strips.
4
After the Lapels are in place and secured, fasten the wall straps to the corresponding Posts. Be sure to place
the strap under the toggle ropes. Engage the buckles and pull straps to tighten.
5
From the inside of the tent, beginning at the top, fasten the Velcro strip of the wall to the Joiner Flap. Work
down, insuring the Velcro strips are aligned to provide a good seal.
6
From the outside of the tent, straighten the down spout and any other parts of the joiner to make sure
everything is tightly secured. Adjust the downspouts so water will travel way from the tents. Make sure
water flows away from other structures or traffic within the venue.
7
Valance
Front
Valance Ring
Lapel
Strap
