Edge Power Solutions
IPS-32-1 / IPS-32-2 / IPS-16 Installation Manual Revision 4.0 0322021
FIGURE 7.1
2.8
LED Status Indicators and Reset Buttons
Each 56VDC output has a corresponding status indicator light and reset button.
•
Green: Indicates output ready or normal circuit condition
•
Red: Indicates output fault condition (Short, Over-Current or Admin Down)
o
Push Button or Software output reset is required once fault is cleared.
Circuit will return to fault condition if fault still exist.
•
Pushing reset button while circuit is in normal condition will remove power from the output for (2) seconds beyond the
button release.
PAGE 8
