background image

Edge Power Solutions                                                                                                                                                                                   

IPS-32-1 / IPS-32-2 / IPS-16 Installation Manual                                                                                                                               Revision 4.0  0322021 

 

SECTION 3:  Optional Integrated Fiber Optic Splitter 

 

 

3.1 Optional Integrated Splitter Connection 

 

 

 

 

 

 

 

 

3.1.1 Source Connection Input: 

 

 

 

 

Connect Input from active signal source equipment (GPON Port) using an LC/APC connector 

 

Patch other end to signal source equipment or connected fiber patch panel position. 

 

3.1.2 Output Connection: 

 

 

 

 

Connect output from positions 1-32 on IPS-32 or positions 1-16 on IPS-16 

 

Patch other end to servicing device or device servicing fiber patch panel position.  

 

 

END 

PAGE 9

 

WARNING:   

Avoid eye exposure to fiber optic openings on this device when connected to external equipment in any 

position.  A fiber optic splitter is installed in this device.  A connection to any position transmits invisible 

laser light on all ports that could be damaging to the eye.  

Summary of Contents for 56VDC IPS Series













Reviews: