ESC %
Select User-defined Set
Format:
ASCII code: ESC %
n
Decimal:
27 37 n
Hexadecimal: 1B 25 n
Comments:
This sequence is used to print the user-defined (download)
character set. ESC & is required to define the character set. The
following values can be used for n:
0: Selects the normal set.
1: Selects the user-defined set.
ESC 6
Enable Printable Characters
Format:
ASCII code:
ESC 6
Decimal:
27 54
Hexadecimal: 1B 36
Comments:
When a graphics character set is selected, ESC 6 enables the
printing of codes 128 through 159 (decimal) as characters, not
control codes. See the Appendix for characters printed.
ESC 7
Format:
ASCII code:
ESC 7
Decimal:
27 55
Hexadecimal: 1B 37
Enable Upper Control Codes
Comments:
When a graphics character set is selected, ESC 7 causes codes 128
through 159 to be treated as control codes. This is the default.
Command Summary
9-37
Summary of Contents for 1010
