50
Using Optional Equipment
Installing the Network Image Express Card
The Network Image Express card (B12B808393) allows you to share your scanner
without the need for a server. The card supports 10BaseT/100BaseT full and half
duplex networks.
Any computer on the network that has the
EPSON Scan software installed can scan and
import a document from the Epson
GT-15000.
For information on setting up and using the
scanner on a network, see your on-screen
Epson GT-15000 Reference Guide.
Follow these steps to install the card in your scanner and connect it to your network:
1. Turn off the scanner and disconnect the power cord and any cables.
Caution:
Static electricity can damage electronic components like the Network
Image Express card. To discharge static electricity, touch the scanner’s metal
frame before handling the card.
2. Remove the two screws securing the shield
plate to the optional interface slot. Then
remove the plate.
Put the screws and shield plate in a safe
place in case you want to reinstall the
shield plate later.
3. Turn the card over so that the
component side is facing down, and
insert it in the optional interface slot.
4. Push gently until the card is firmly
seated.
5. Tighten the retaining screws and plug in
the scanner.
Summary of Contents for 15000 - GT - Flatbed Scanner
