6-14
Maintenance and Troubleshooting
Error Indicator
If an error occurs, the scanner stops operating and the indicator
light
shows of error.
Command error
The scanner has received incorrect commands from your
scanning software.
When this error occurs, try to rescan the document. The scanner
returns to normal when it receives correct commands. Normally
you do not need to reset the scanner when this type of error
occurs.
Option error
Paper is jammed in the optional Automatic Document Feeder.
Turn the scanner off and remove the jammed paper from the
Automatic Document Feeder.
Interface error
The interface setup is wrong or the scanner is not properly
connected to the computer.
When this error occurs, check the interface connection and then
push the
P
Operate button to turn the scanner off and then back
on again to reset it.
Color of light
Pattern of light
Error type
Red
On
Flashing
Flashing
“Interface error” on page 6-14
Flashing
Summary of Contents for 1640SU - Perfection Photo Scanner
