A-6
Enhancing Your Printer With Options
R4C4590
Rev. D
A5 size
OPTIONS.FM
3/30/01
Pass 1
L
Proof Sign-off:
Takahashi, Kono
_______
Takahashi
_______
Hoadley, Courtier _______
You are now ready to load paper with your cut-sheet feeder as
described in the next section. To remove the cut-sheet feeder, turn
off the printer and reverse the steps above.
Note:
Even if you are not using the cut-sheet feeder, you can use its paper guide
instead of the standard paper guide. See “Loading paper manually from
the paper guide” on page A-14 for more information.
Loading paper from the cut-sheet feeder
This section describes how to load paper in the high-capacity and
second-bin cut-sheet feeders.
Note:
❏
Load single-sheet multipart forms, envelopes, and postcards only in
the high-capacity cut-sheet feeder (bin 1 of the double-bin cut-sheet
feeder).
❏
For single-sheet multipart forms, use only the type that are glued at
the top of the forms.
❏
To avoid paper jams, do not allow the printer to stack more than 40
printed sheets on the paper guide at one time.
c
Caution:
Do not use labels in the cut-sheet feeder.
