2-6
Paper Handling
R4C4590
Rev. D
A5 size
HANDLE.FM
3/30/01
Pass 1
L
Proof Sign-off:
Takahashi, Kono
_______
Takahashi
_______
Hoadley, Courtier _______
Adjusting the Paper Thickness Lever
You need to set the paper thickness lever to match the thickness
of your paper.
There are nine lever positions, from -1 to 7. The
Auto
position is
also available on the LQ-680Pro.
For LQ-680 users:
Set the paper thickness lever manually to the appropriate position
from -1 to 7, as described in the table below.
For LQ-680Pro users:
We recommend using the
Auto
position for all types of paper.
When the Auto position is selected, the printer automatically
adjusts itself to match the thickness each time it loads new paper,
but your printing time may be slowed. If you use the same type
of paper every time, you may want to set the paper thickness lever
to the appropriate manual position as described in the table below
to speed-up printing.
