EPSON Stylus Pro 3800/3800C/3850
Revision A
DISASSEMBLY & ASSEMBLY
Disassembly/Assembly Procedure (Group 1)
126
4.3.6.2 ENCODER, PF, ASSY.
1.
Remove the HOUSING, UPPER.
(p106)
2.
Disconnect the FFC from CN1 connector of the ENCODER, PF, ASSY.
See Figure 4-49.
3.
Remove the screw that secures the ENCODER, PF, ASSY.
See Figure 4-49.
One C.B.S. 3 x 6 screw (6 ± 1 kgf.cm)
4.
Lift up the ENCODER, PF, ASSY. to remove the detection part from the SCALE,
PF, 180 and remove the ENCODER, PF, ASSY.
See Figure 4-49.
Figure 4-49. Removing the
ENCODER, PF, ASSY.
C A U T I O N
When performing the next step, be extremely careful not to
contaminate, deform or damage the SCALE, PF, 180.
C.B.S. 3x6
Connector
SCALE, PF, 180
ENCODER, PF, ASSY.
Insert the SCALE, PF, 180 into the detection part of the sensor,
and install the ENCODER, PF, ASSY.
When installing the ENCODER, PF, ASSY., be sure to engage
the tab of the ENCODER, PF, ASSY. to the main frame and
insert the positioning holes over the guide pins.
A D J U S T M E N T
R E Q U I R E D
Whenever the ENCODER, PF, ASSY. is replaced,
the corresponding adjustments must be carried out.
See Chapter 5
"ADJUSTMENT" (p190)
.
tab
Inner side of Left Frame
guide pins
Summary of Contents for 3800 - Stylus Pro Color Inkjet Printer
