1-16
16
|
Setting Up the Printer On a Network
Configuring the Network Interface
1. Make sure that the printer is turned on and the LCD displays
READY
.
2. Press the
Menu
r
button on the printer’s control panel to enter the
printer’s menu system.
3. Press
d
to highlight
NETWORK SETUP
, then press
r
.
4. Press
r
then
d
to highlight
ENABLE.
5. Press Enter. An asterisk appears next to
ENABLE
to show that it’s
selected.
6. Press
l
then
d
to highlight
IP ADDRESS SETTING
.
7. Press
r
and then
u
or
d
to choose one of the following IP configuration
settings:
•
AUTO:
Select this setting if your network uses a DHCP server to
configure your network devices’ IP settings automatically.
•
PANEL:
Select this setting if you would like to configure the
printer’s IP settings manually.
8. Press Enter. An asterisk appears next to the setting you selected.
9. Press
l
to go back. Then do one of the following:
•
If you selected
AUTO
as the IP ADDRESS SETTING, press the
+
Cancel button to exit the printer menu. Then continue with
•
If you selected
PANEL
as the IP ADDRESS SETTING, continue
10. Press
d
to highlight
IP, SM, DG SETTING
, then press
r
. The LCD
displays the
IP ADDRESS
.
11. Press
u
or
d
to change each octet value, then press
r
to select the next
octet. When you have changed the value of the last octet, press
r
. The
LCD displays the
SUBNET MASK
.
Note:
If you don’t know
which setting to use, see
your network administrator
for help configuring the
printer’s IP settings.
sp3800Guide.book Page 16 Monday, January 29, 2007 11:08 AM
Summary of Contents for 3800 - Stylus Pro Color Inkjet Printer
Page 1: ...Epson Stylus Pro 3800 PRINTER GUIDE sp3800Guide book Page 1 Monday January 29 2007 11 08 AM ...
Page 4: ...4 sp3800Guide book Page 4 Monday January 29 2007 11 08 AM ...
Page 8: ... 8 8 Contents sp3800Guide book Page 8 Monday January 29 2007 11 08 AM ...
Page 134: ... 134 134 Index sp3800Guide book Page 134 Monday January 29 2007 11 08 AM ...