4-73
Printing with Epson Drivers for Windows
|
73
You see a window like this one:
8. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
•
Color Density
lets you control the ink saturation level (for example,
when you turn off color management in your printer software).
•
Drying Time per Print Head Pass
lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
•
Paper Feed Adjustment
helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
•
Paper Thickness
helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
•
Platen Gap
lets you fine-tune the setting for unusually thick or thin
paper.
When you’re finished selecting Paper Configuration settings, click
OK
.
9. Click
Save Settings
if you want to have your advanced settings
available for reuse. Then type a name for the group of settings and click
Save
. The name is added to your list of custom settings.
10. When you’re finished setting advanced printer options, click
OK
.
Note:
You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
sp3800Guide.book Page 73 Monday, January 29, 2007 11:08 AM
Summary of Contents for 3800 - Stylus Pro Color Inkjet Printer
Page 1: ...Epson Stylus Pro 3800 PRINTER GUIDE sp3800Guide book Page 1 Monday January 29 2007 11 08 AM ...
Page 4: ...4 sp3800Guide book Page 4 Monday January 29 2007 11 08 AM ...
Page 8: ... 8 8 Contents sp3800Guide book Page 8 Monday January 29 2007 11 08 AM ...
Page 134: ... 134 134 Index sp3800Guide book Page 134 Monday January 29 2007 11 08 AM ...