manualshive.com logo in svg

Epson 835p - PowerLite XGA LCD Projector, User Manual

The Epson 835p - PowerLite XGA LCD Projector is a top-notch audiovisual equipment designed to elevate your presentations or movie nights. To get the most out of this device, make sure to download and refer to the comprehensive User Manual available for free on 88.208.23.73:8080. Stay informed, enhance your experience!

Share
Download
background image

Managing Projectors

139

When you finish changing an address in the network menu, press 
the 

Enter

 button (on the remote control) or the 

Auto/Enter

 

button (on the projector). 

5. When you’re done, highlight 

OK

 and press 

Enter

. 

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your, 
projectors whether connected wirelessly or over a wired network. It 
lets you easily turn the projectors on or off (together or individually), 
switch image sources, and check their status. 

Before using EMP Monitor, make sure you’ve installed the software 
(available for Windows only) as described on page 185. The 
computer you’re using to monitor the projector should already 
be connected to your network.

Opening and Closing EMP Monitor

To start EMP Monitor,

 

click

 Start > Programs 

or

 All Programs > 

Epson Projector > EMP Monitor

. 

If you’ve added the program to the Startup programs folder, then it 
may already be open. If so, click the icon in the system tray on the 
lower-right corner of your screen to display the EMP Monitor 
window:

To close EMP Monitor, right-click the program icon shown above 
and select 

Exit

.

note

If you want to monitor 
projectors while they are in 
standby mode, select 

Standby Mode

 in the 

Extended menu, then select 

Network ON

. See 

page 134.

Click here to start EMP Monitor

Summary of Contents for 835p - PowerLite XGA LCD Projector



















































































































































































































Reviews:

No comments

Related manuals for 835p - PowerLite XGA LCD Projector

DGM L-2242W User Manual preview
L-2242W
Brand: DGM Pages: 50
Mitsubishi E85LCD-BK User Manual preview
E85LCD-BK
Brand: Mitsubishi Pages: 36
NCI NC-015103C Quick Start Manual preview
NC-015103C
Brand: NCI Pages: 4
Counterline vision aire Operation And Maintenance Manual preview
vision aire
Brand: Counterline Pages: 15
SWIT S-1051H User Manual preview
S-1051H
Brand: SWIT Pages: 12
AccuMed ABP801 Instruction Manual preview
ABP801
Brand: AccuMed Pages: 15
Barco Nio 2MP LED User Manual preview
Nio 2MP LED
Brand: Barco Pages: 54
SR Scales SRV947IFS Operating And Service Manual preview
SRV947IFS
Brand: SR Scales Pages: 12
Akron OZZIEMASTER 922 Installation, Operating And Maintenance Instructions preview
OZZIEMASTER 922
Brand: Akron Pages: 42
Alecto IVM-180 User Manual preview
IVM-180
Brand: Alecto Pages: 20
NEC MultiSync EA305WMi User Manual preview
MultiSync EA305WMi
Brand: NEC Pages: 31
Postium PRM-207Q User'S Manualp preview
PRM-207Q
Brand: Postium Pages: 18
Samsung T22B300 Series Service Manual preview
T22B300 Series
Brand: Samsung Pages: 82
Samsung T220 - SyncMaster - 22" LCD Monitor Service Manual preview
T220 - SyncMaster - 22" LCD Monitor
Brand: Samsung Pages: 24
HANNspree HF287H Quick Start Manual preview
HF287H
Brand: HANNspree Pages: 19
AudioBahn AVM175V Operating Instructions Manual preview
AVM175V
Brand: AudioBahn Pages: 20
Dell UltraSharp 1703FP Setting Up preview
UltraSharp 1703FP
Brand: Dell Pages: 2
Dell UltraSharp U2417HJ User Manual preview
UltraSharp U2417HJ
Brand: Dell Pages: 30

Brands by name

Popular brands

Load more brands