Epson 835p - PowerLite XGA LCD Projector User Manual Download

Page: 162 / 210

162

Maintaining the Projector

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

Use a canister of compressed air to remove dust.

To remove dirt or smears on the lens, use lens-cleaning tissue. If
necessary, moisten a soft cloth with lens cleaner and gently wipe the
lens.

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power
cord.

■

To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.

■

To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent. Then wipe the case.

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours of use. If
they are not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector.

Follow these steps:

1. Turn off the projector. Wait for the

Power

light to stop flashing,

then unplug the power cord.

Remove the cap
before cleaning

caution

Do not use wax, alcohol,
benzene, thinner, or other
chemical detergents. These
can damage the case.

note

To order replacement air
filters, request part number
V13H134A07. See page 13
for ordering information.

Summary of Contents for 835p - PowerLite XGA LCD Projector



















































































































































































































Search results

Summary of Contents for 835p - PowerLite XGA LCD Projector

Reviews:

Related manuals for 835p - PowerLite XGA LCD Projector

Brands by name

Popular brands

Epson 835p - PowerLite XGA LCD Projector, User Manual

Search results

Summary of Contents for 835p - PowerLite XGA LCD Projector

Reviews:

Related manuals for 835p - PowerLite XGA LCD Projector

Brands by name

Popular brands