manualshive.com logo in svg

Epson 835p - PowerLite XGA LCD Projector, User Manual

The Epson 835p - PowerLite XGA LCD Projector is a top-notch audiovisual equipment designed to elevate your presentations or movie nights. To get the most out of this device, make sure to download and refer to the comprehensive User Manual available for free on 88.208.23.73:8080. Stay informed, enhance your experience!

Share
Download
background image

Solving Problems

179

■

If you’re using Access Point mode and you’re connecting to the 
wrong network, you may be experiencing signal interference from 
another network. Try resetting your access point or base station, 
then restart NS Connection.

■

If you’re using AirPort, the projector’s ESSID should match the 
AirPort network name, not the name of the AirPort base station. 
To check the network name, start the AirPort Admin utility, 
select your base station, and click 

Configure

. Then click 

Show 

All Settings

. The network name appears on the AirPort tab.

■

If you’re prompted for a password when you connect, enter the 
WEP encryption key (if you’re using WEP encryption).

■

Try connecting using IP Connect Mode; see page 89.

An image displayed with EasyMP appears distorted.

Because of their resolution, some JPEG images cannot be displayed 
correctly. Some JPEG files from digital cameras cannot be previewed. 
Files with a high compression ratio may appear blurry.

In EMP SlideMaker 2, PowerPoint files don’t appear in the 
file window.

EMP SlideMaker 2 does not support PowerPoint 95. Files created 
in this version of PowerPoint must be opened and resaved in 
PowerPoint 97 or later.

In EMP SlideMaker 2, your PowerPoint files don’t display 
thumbnails and can’t be pasted into scenarios.

If you use PowerPoint 97, make sure the MS Office JPEG converter 
has been installed. Run the Office 97 installer, display the 

Converts 

and Filters

 option, and install the JPEG filter. Also, make sure 

PowerPoint is installed on the computer you’re using to build the 
scenario.

Your PowerPoint movie file does not play back. 

Movies files inside a PowerPoint file cannot be played on the scenario.

Summary of Contents for 835p - PowerLite XGA LCD Projector



















































































































































































































Reviews:

No comments

Related manuals for 835p - PowerLite XGA LCD Projector

Idmed ToFscan User Manual preview
ToFscan
Brand: Idmed Pages: 28
Uniden Lullaboo G403 Manual De Usuario preview
Lullaboo G403
Brand: Uniden Pages: 54
Samsung P2250W User Manual preview
P2250W
Brand: Samsung Pages: 41
A&D UB-511 Manuale Di Istruzioni preview
UB-511
Brand: A&D Pages: 17
YURAKU YUR.VISION YV19WP3 Brochure preview
YUR.VISION YV19WP3
Brand: YURAKU Pages: 2
Itek ITMF30V104FHD User Manual preview
ITMF30V104FHD
Brand: Itek Pages: 23
Elmo LCM4N Specifications preview
LCM4N
Brand: Elmo Pages: 1
A&A Tech EEM AM4 FE H01 Operator And Maintenance Manual preview
EEM AM4 FE H01
Brand: A&A Tech Pages: 19
H+H Babyruf MBF 9091 Operating Instructions Manual preview
Babyruf MBF 9091
Brand: H+H Pages: 60
Excel Technology EXO201SX1 Operating Manual preview
EXO201SX1
Brand: Excel Technology Pages: 7
Harris CMN-41 Installation And Operation Handbook preview
CMN-41
Brand: Harris Pages: 168
Hanns.G HH191 User Manual preview
HH191
Brand: Hanns.G Pages: 22
Xenarc 1020TSH Installation Manual preview
1020TSH
Brand: Xenarc Pages: 15
IEE PDK 102C-0WG03L Reference Manual preview
PDK 102C-0WG03L
Brand: IEE Pages: 6
Samsung SyncMaster 1100MB Manual Del Usuario preview
SyncMaster 1100MB
Brand: Samsung Pages: 63
Samsung SyncMaster 1100 DF Manual preview
SyncMaster 1100 DF
Brand: Samsung Pages: 79
Samsung S24R352FHU User Manual preview
S24R352FHU
Brand: Samsung Pages: 44
Samsung SYNCMASTER 320MPN-3 User Manual preview
SYNCMASTER 320MPN-3
Brand: Samsung Pages: 158

Brands by name

Popular brands

Load more brands