manualshive.com logo in svg

Epson 835p - PowerLite XGA LCD Projector, User Manual

The Epson 835p - PowerLite XGA LCD Projector is a top-notch audiovisual equipment designed to elevate your presentations or movie nights. To get the most out of this device, make sure to download and refer to the comprehensive User Manual available for free on 88.208.23.73:8080. Stay informed, enhance your experience!

Share
Download
background image

40

Using the Remote Control

Projecting Images Without a Screen

Even if you don’t have a screen, you can project images onto surfaces 
like blackboards and colored walls without loss of image color. Your 
projector has a sensor that measures the conditions of the projection 
surface and automatically adjusts the colors and shading of your 
image. For example, if you’re projecting onto a surface near a window, 
your image appears clear and bright rather than faint. 

Making Initial Color Corrections

Press the 

Wall Shot

 button on either the remote control or the 

projector’s control panel while projecting an image. 

Wall Shot’s status appears in the upper right corner of your screen. 
Then you see a sequence of colors flash for a couple of seconds while 
the sensor measures the conditions of the projection surface and 
adjusts the image. 

The projector stores the correction values obtained by the last Wall 
Shot measurements. This is useful if you’re projecting against the 
same surface and under the same conditions. To retrieve these 
corrections, repeatedly press the 

Wall Shot

 button until you see 

Wall 

Shot Memory Call

. This setting applies the stored Wall Shot values.

note

If the status message 
indicates that Wall Shot is 
off, press the 

Wall Shot

 

button again to turn it on.

Summary of Contents for 835p - PowerLite XGA LCD Projector



















































































































































































































Reviews:

No comments

Related manuals for 835p - PowerLite XGA LCD Projector

A&D UB-511 Manuale Di Istruzioni preview
UB-511
Brand: A&D Pages: 17
BIOS Diagnostics ULTRA 3MS1-4Y Instruction Manual preview
ULTRA 3MS1-4Y
Brand: BIOS Diagnostics Pages: 24
Aspect BIS VIEW Service Information Manual preview
BIS VIEW
Brand: Aspect Pages: 100
TRANSTEK TMB-2088-T User Manual preview
TMB-2088-T
Brand: TRANSTEK Pages: 19
Siebert XC420 Series Operating Instructions Manual preview
XC420 Series
Brand: Siebert Pages: 47
Fuji Electric MONITOUCH V808 CH Series Operating Instructions Manual preview
MONITOUCH V808 CH Series
Brand: Fuji Electric Pages: 16
Farenheit T-7012MH User Manual preview
T-7012MH
Brand: Farenheit Pages: 4
Beurer BC 42 Operating Instructions Manual preview
BC 42
Brand: Beurer Pages: 75
Sanitas SPM 21 Operating Instructions Manual preview
SPM 21
Brand: Sanitas Pages: 52
lifeSMART LS-926 User Manual preview
LS-926
Brand: lifeSMART Pages: 18
max mobility PushTracker User Manual preview
PushTracker
Brand: max mobility Pages: 12
Avery Weigh-Tronix XR 2000 Installation And Technical Instructions preview
XR 2000
Brand: Avery Weigh-Tronix Pages: 58
MultiTouch MT467 User Manual preview
MT467
Brand: MultiTouch Pages: 16
Valcom VL550F Quick Start Manual preview
VL550F
Brand: Valcom Pages: 3
Moravian Instruments DataLab LCD 15 Manual preview
DataLab LCD 15
Brand: Moravian Instruments Pages: 11
Soehnle FT 5 Operating Instructions Manual preview
FT 5
Brand: Soehnle Pages: 23
Iiyama ProLite T1731SR-1 Specification preview
ProLite T1731SR-1
Brand: Iiyama Pages: 1
Oricom Secure 510 User Manual preview
Secure 510
Brand: Oricom Pages: 47

Brands by name

Popular brands

Load more brands