Presenting Through a Wireless Network
83
Projecting Wirelessly
Once you’ve started EasyMP and set up your projector and computer
in either Ad Hoc mode or Access Point mode, follow these steps to
start NS Connection and project wirelessly.
1. Make sure you’ve installed your 802.11g wireless card in your
projector (see page 60).
2.
Windows:
Select
EMP NS Connection
from the Start menu.
Macintosh OS X:
Double-click the
EMP NS Connection
icon in
your Applications folder.
3. The first time you start NS Connection, you may see a dialog box
asking you to select your network. Select the IP address for your
computer’s network card and click
OK
.
note
If you don’t see your network
adapter’s IP address, allow a
minute for it to appear. If
your access point or AirPort
base station uses DHCP
(
Distribute IP addresses
setting is enabled for
AirPort), sometimes it takes
a minute for the server to
pick up the IP address.
Once you’ve selected the IP
address for your network
adapter, you won’t see the
Switch network dialog box
when you start NS
Connection. If you want to
change to a different
network adapter, click
Extension
on the EMP NS
Connection dialog box, then
click
Switch LAN
on the
extension dialog box.
Summary of Contents for 835p - PowerLite XGA LCD Projector
