Presenting Through a Wireless Network
81
■
For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■
For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■
For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
6. When you’re done making settings, highlight the
OK
button at
the top of the screen and press
Enter
.
Adding WPA Security
When you click the
Security
button on the Network screen, you see
this screen:
1. Highlight
WPA
and press
Enter
.
2. Highlight the
PSK
(pre-shared key) text box and press
Enter
. The
text box turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in alphabetical
order, or down to select letters in reverse order; then press the
pointer button to the right to move to the next character
position. When done typing the key, press
Enter
.
3. When you’re done making settings, highlight the
OK
button at
the top of the screen and press
Enter
.
note
WPA is available on the
Macintosh only if the
wireless LAN on your
Mac supports WPA
authentication.
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, press the
Num
button on the remote
control. The button lights up
to indicate that the numeric
keypad mode is active. Press
the
Num
button again to
exit numeric keypad mode.
Summary of Contents for 835p - PowerLite XGA LCD Projector
