Epson ActionLaser 1000, Installation Manual

11. Click LaserWriter in the Chooser menu. The name of your

printer appears in the Select a LaserWriter box. Click on the

name of your printer and then close the Chooser.

Note:

If the 

LaserWriter printer driver is not yet installed on your

computer, you can find it on one 

of 

your Macintosh System disks.

Follow your computer manual instructions to install it on your

Macintosh.

12. begin printing using your application software.

For the EPL-8000

Note:

If 

you have an Epson EPL-8000 printer, you must have 

version 22.48 or later to use Epson Talk. To find out your printer’s

firmware version, print a status sheet as described in your printer

manual. If you do not have the above firmware version, please call the

Epson Connection at (800) 922-8911.

1. Press the 

ON LINE 

button to take the printer off line.

2. Hold down the 

SelecType 

button until the 

Level 2 light

comes on.

3. Press   until MODE ASSIGN appears on the display.

4. Press   until CH P appears.

5. Press   until CH O appears.

6. 

Press 

7. Press   until CH O PS appears.

8. Press 

ä 

to set the PS setting.

9. Press   to return to MODE ASSIGN.

10. Press   until P-CONFIG.SAVE appears.

5