2
Setting Up the Scanner
2-7
R4C0910
Rev. C
A5 size
SETUP.FM
1/12/00
Pass 3
R
Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
Initialization
Before connecting the scanner to your computer, follow the steps
below to make sure that the scanner is operating properly.
1. Open the document cover so you can see the operation of the
scanner during initialization (startup).
2. Turn on the scanner by pressing the
P
operate
button.
3. Make sure the fluorescent lamp on the carriage and the
READY
light flash, and the carriage moves slightly.
4. The
READY
light stays on, meaning the scanner has completed
initialization.
5. Turn off the scanner.
If the scanner does not work as described, make sure the power
cord is firmly plugged in and that you have released the
transportation lock, then try again.
c
Caution:
Whenever you turn off the scanner, wait at least 10 seconds before
turning it back on. Rapidly turning the scanner on and off can
damage the scanner.
