Select
Timer
to set a
timeout
period, or select
Normal
to
disable standby mode. When you select
Timer,
you see these
prompts:
Standby Time (minutes):
Time-out on (K) eyboard activity or (Wemory
access (K/M) :
Enter the number of minutes to wait before entering standby
mode and press. Then enter
K
or to indicate the type of
activity. If you enter
K,
the LCD panel will enter standby mode
if there is no keyboard activity for the specified number of
minutes. If you enter
M
, the LCD panel will enter standby mode
if video memory is not accessed for the specified number of
minutes. Press to initiate the timer.
The standby mode initiated by the VGACONF utility is exactly
the same as Suspend mode. You can reactivate the system at
any time by pressing the [SARI key.
Select
Quit
to exit the VGACONF program and return to the
operating system prompt.
Using VGACONF From the Command fine
To quickly change one or more VGA configuration settings,
you can initiate VGACONF from the command line with
option parameters. At the command prompt, enter the
VGACONF command in the following format:
VGACONF [options]
Using the VGA Utilities
7-9
Summary of Contents for ActionNote 4SLC-25
Page 1: ......
Page 130: ...AT Commund Summary continued FaxModem Command Set B 3 ...
Page 135: ...AT Register Summary B 8 Fax Modem Command Set ...
