Using the Projector Menus
27
3. Press
Enter
to select this feature. You see the following
message:
4. Select
Yes
and press
Enter
. A selection box displays over
the image.
5. Use the
Enter
button on the remote control to select the
area of the image you want to use. Once you have selected
the entire area, press
Enter
.
6. When you see the message “Do you use this image?” select
Yes
and press
Enter
. If you want to change the area
selected, select
No
and repeat step 5. You see the following:
7. Use the
Enter
button on the remote control to select a
zoom rate (display size), and then press
Enter
.
appendix.book Page 27 Tuesday, December 14, 1999 4:08 PM
