Caution
Make sure you ground yourself before you touch the
processor chip. Then remain as stationary as possible
while you install it. Do not touch the pins on the
processor chip. Handle the microprocessor only by the
edges of its case.
3.
Position the chip puller between the processor chip and the
socket.
4.
Gently pull the processor chip straight up and set it aside.
5.
Remove the new chip from its package and inspect the pins.
If they are bent, do not install the chip. Contact your
vendor for a new microprocessor.
6.
Position the processor chip over the socket, aligning the
notched or marked corner of the chip with the pin 1 hole on
the socket.
pin 1
4-20
Installing Optional Devices
Summary of Contents for ActionNote 866C
Page 1: ......
Page 57: ...2 22 Using Your Computer ...
Page 69: ...3 1 2 Powering the Computer ...
Page 121: ...A 8 Specifications ...
