EPSON AcuLaser C4000/C4100/C3000
Revision F
Troubleshooting
Level 2 FIP
3-259
FIP-P7 "Fogging"
Description / initial check
Printout is blurry.
• This means that toner is adhering to the white areas of the printout.
initial check
Are any parts being used that have incorrect specifications, or that are installed incorrectly, damaged, bent, dirty or that have foreign particles adhering to them?
Related parts
The following parts are related to this problem. There may be a problem with one of these parts, so if the problem cannot be solved by following this FIP, replace the following parts
one by one and check.
BTR Assy (PL9.1.2), ROS Assy (PL11.1.1), HVPS Sub (PL12.1.9) and PWB Controller (PL16.1.5)
Item
Check
Yes
No
1
PHD Assy (PL11.1.3)
1. Replace the PHD Assy.
2. Carry out a test print.
Does the same problem still occur?
Go to step 2.
Problem solved.
2
Chute Assy In (PL6.1.1) grounding
Check the Chute Assy In grounding circuit.
Is the in Chute Assy In grounded?
Go to step 3.
Repair the location of the
grounding fault.
3
Chute Assy Out (PL7.1.1) grounding
Check the Chute Assy Out grounding circuit.
Is the in Chute Assy Out grounded?
Go to step 4.
Repair the location of the
grounding fault.
Summary of Contents for AcuLaser C3000 Series
