EPSON AcuLaser C4000/C4100/C3000
Revision F
Disassembly and Assembly
Disassembly Assembly Procedures
4-441
4.2.20.30 CLUTCH ASSY TURN (PL17.3.18) Removal
TRAY 2
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the COVER L. (See Section 4.2.20.3.)
4. Remove the CHUTE ASSY TURN of the TRAY 2. (See Section 4.2.20.4.)
5. Remove the HARNESS ASSY FDR 2T (gray). (See Section 4.2.20.5.)
6. Remove the DRIVE ASSY FEEDER. (See Section 4.2.20.7.)
7. Remove the PWBA FEEDER. (See Section 4.2.20.10.)
8. Remove the GUIDE ASSY CASSETTE R of the TRAY 2. (See Section
9. Remove the GUIDE ASSY CASSETTE L of the TRAY 2. (See Section
10. Remove the LINK ACTUATOR of the TRAY 2. (See Section 4.2.20.13.)
11. Remove the PICK UP ASSY TR 2. (See Section 4.2.20.14.)
12. Remove the STOPPER CLUTCH. (See Section 4.2.20.29.)
13. Disconnect the connector (P/J825) of the CLUTCH ASSY TURN.
14. Remove the CLUTCH ASSY TURN.
TRAY 3
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the STOPPER CLUTCH. (See Section 4.2.20.29.)
4. Disconnect the connector (P/J835) of the CLUTCH ASSY TURN.
5. Remove the CLUTCH ASSY TURN.
Figure 4-148. CLUTCH ASSY TURN (PL17.3.18) Removal
When assembling, do so in such a way that the hooks of the
CLUTCH ASSY TURN are to the right and the harness is to
the left.
HANABI_FDR_CHAP03_031FD
Summary of Contents for AcuLaser C3000 Series
