Functions of the Control Panel
195
6
6
6
6
6
6
6
6
6
6
6
6
Speed
Specifies the pulse width of the ACKNLG signal when receiving
data in the Compatibility mode or Nibble mode. When
Fast
is
selected, the pulse width is about 1
µ
s. When
Normal
is selected,
the pulse width is about 10
µ
s.
Bi-D
Allows you to specify the bidirectional communication mode.
When you select
Off
, bidirectional communication is disabled.
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If
Maximum
is selected, more memory is
allocated for receiving data. If
Minimum
is selected, more memory
is allocated for printing data.
Note:
❏
To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in “Reset Menu” on page 193.
❏
Resetting the printer erases all print jobs. Make sure the
Ready
light is not flashing when you reset the printer.
USB Menu
These settings control communication between the printer and
the computer when using the USB interface. These settings are
activated after turning the printer off and then on.
Item
Settings (default in bold)
USB I/F
On
, Off
Buffer Size
Normal
, Maximum, Minimum
Summary of Contents for AcuLaser C4000
