background image

364

Working with Fonts

When selecting fonts in your application software, choose the font 
name listed in the HP Equivalent column.

Note:
Depending on the print density, or on the quality or color of the paper, 
OCR A, OCR B, Code39, and EAN/UPC fonts may not be readable. 
Print a sample and make sure the fonts can be read before printing large 
quantities. 

ESC/P2 and FX modes

* Available only in ESC/P2 mode.

Note:
Depending on the print density, or on the quality or color of the paper, 
OCR A and OCR B fonts may not be readable. Print a sample and make 
sure the fonts can be read before printing large quantities. 

Font Name

Family

Courier SWC

Medium, Bold

EPSON Prestige

-

EPSON Roman

-

EPSON Sans serif

-

Swiss 721 SWM*

Medium, Bold

Letter Gothic SWC

Medium, Bold

Dutch 801 SWM*

Medium, Bold

EPSON Script

-

OCR A

-

OCR B

-

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Reviews: