![background image](http://html.mh-extra.com/html/epson/aculaser-color-1000/aculaser-color-1000_service-manual_2419002168.webp)
EPSON AcuLaser C2000 / AcuLaser C1000
Revision E
Disassembly and Assembly
Disassembling Procedure
168
4.2.20 PH (Print Head) Mechanism
4.2.20.1 PH Connector Removal
1. Remove the Rear Controller Cover. (See “Rear Controller Cover Removal”
on page -145.)
2. Remove the Rear Cover. (See “Rear Cover Removal” on page -146.)
3. Remove 2 PH connectors from MCU (PWB-A) Board.
4. Remove PH harness from the harness duct.
Figure 4-50. PH Connector Removal
4.2.20.2 PH Cover Removal
1. Remove the Rear Controller Cover. (See “Rear Controller Cover Removal”
on page -145.)
2. Remove the Rear Cover. (See “Rear Cover Removal” on page -146.)
3. Remove 2 PH connectors from MCU (PWB-A) Board.
4. Remove the PH harness from the harness duct.
Figure 4-51. PH Cover Removal
Summary of Contents for ACULASER COLOR 1000
