![background image](http://html.mh-extra.com/html/epson/aculaser-cx16nf/aculaser-cx16nf_user-manual_21056191.webp)
This message...
means...
Do this...
SEARCHING
The machine is searching data.
No action needed.
SCANNING
The machine is scanning the document.
Warming Up
The machine is warming up or AIDC is
being performed.
REFRESHING
PLEASE WAIT!
The printer is adjusting the toner
distribution.
Error Messages
Note:
For details on fax error messages, refer to the Facsimile User’s Guide. (AcuLaser CX16NF only)
This message...
means...
Do this...
ADDRESS IS TOO LONG
The e-mail address retrieved
from the LDAP server exceeds
64 characters.
This machine can handle addresses
containing no more than 64 bytes.
Use a shorter address.
CANNOT CONNECT
xxx Server
A connection with the
specified server could not be
established.
Check the settings specified in the
NETWORK SETTING and E-MAIL
SETTING menus, and then try
sending the data again.
CANNOT GET IP
xxx Server
The IP address of the specified
server could not be obtained
from the DNS server.
Check the settings specified in the
NETWORK SETTING and E-MAIL
SETTING menus, and then try
sending the data again.
CHECK TRAY1 PAPER
LOAD PAPER (
1
xx)
(PRESS START KEY)
Tray1 has run out of paper.
Load media into the tray, and then
press the
Start
key.
Media has misfed in Tray 1.
Remove the misfed media.
Check Print Mode=
l
A printer error occurred
during printing.
Press the
l
key to check the error,
then take the appropriate
measures.
COMMUNICATION ERROR
USB Memory
While data was being sent in
Scan mode, the connection to
the USB memory device was
interrupted.
Check the connection to the USB
memory device, and then try
sending the data again.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Troubleshooting
191