![background image](http://html.mh-extra.com/html/epson/al-m7150dn/al-m7150dn_user-manual_108710233.webp)
3.
Check the settings, and then click
OK
.
Setting Errors
Set the displaying error for the device.
1.
Access Web Config and select the
tab >
Error Settings
.
2.
Set each item.
❏
Paper Size Notice
Set whether to display an error on the control panel when the paper size of the specified paper source is
different from the paper size of the print data.
❏
Paper Type Notice
Set whether to display an error on the control panel when the paper type of the specified paper source is
different from the paper type of the print data.
❏
Auto Error Solver
Set whether to automatically cancel the error if there is no operation on the control panel for 5 seconds
after displaying the error.
3.
Check the settings, and then click
OK
.
Setting Universal Print
Set when you print from external devices without using the printer driver.
Some items are not displayed depending on the printing language of your printer.
1.
Access Web Config and select the
tab >
Universal Print Settings
.
2.
Set each item.
3.
Check the settings, and then click
OK
.
Basic
Items
Explanation
Top Offset(-30.0-30.0mm)
Sets the vertical position of the paper on which printing starts.
Left Offset(-30.0-30.0mm)
Sets the horizontal position of the paper on which printing starts.
Top Offset in Back(-30.0-30.0mm)
Sets the vertical position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Left Offset in Back(-30.0-30.0mm)
Sets the horizontal position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Skip Blank Page
If there is a blank page in the print data, set not to print a blank page.
>
>
233