background image

Protocol Setting Items

Bonjour Settings

Items

Setting value and Description

Use Bonjour

Select this to search for or use devices through Bonjour.

Default : Enable

Bonjour Name

Displays the Bonjour name.

Bonjour Service Name

Displays the Bonjour service name.

Location

Displays the Bonjour location name.

Top Priority Protocol

Select the top priority protocol for Bonjour print.

Default : IPP

Wide-Area Bonjour

Set whether to use Wide-Area Bonjour.

Default : Do Not Use

SLP Settings

Items

Setting value and Description

Enable SLP

Select this to enable the SLP function.

This is used such as network searching in EpsonNet Config.

Default : Enable

WSD Settings

Items

Setting value and Description

Enable WSD

Select this to enable adding devices using WSD, and print
from the WSD port.

Default : Enable

Printing Timeout (sec)

Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.

Default : 300

Device Name

Displays the WSD device name.

Location

Displays the WSD location name.

LLTD Settings

Items

Setting value and Description

Enable LLTD

Select this to enable LLTD. The printer is displayed in the
Windows network map.

Default : Enable

Device Name

Displays the LLTD device name.

Administrator Information

>

Advanced Security Settings

>

Controlling Using Protocols

258

Summary of Contents for AL-M7150DN









































































































































































































































































































Reviews: