Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Revision C
DISASSEMBLY/ASSEMBLY
Disassembly Procedures
183
Confidential
4.2.6.10 ADF PF Roller
Parts/Components need to be removed in advance:
Scanner Unit/ADF Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover/ADF
Document Support Assy/ADF Frame Unit
Removal procedure
1.
Remove the Spur Gear 6.4, securing ring and the ADF EJ Rear Bush from the
ADF PF Roller.
Figure 4-200. Removing the ADF PF Roller (1)
2.
Release the hooks (x2) and remove the ADF EJ Front Bush from the ADF
Frame Unit.
Figure 4-201. Removing the ADF PF Roller (2)
When placing the cables on the ADF Cable Cover, route them
as shown below.
Figure 4-199. Routing the cables in the ADF Cable Cover
ADF Cable Cover
ADF Sensor cable
ADF Motor cable
Align the edge of the
acetate tape to the edge
of the ADF Cable Cover.
Grounding Wire
Acetate tape
ADF PF Roller
ADF EJ Rear Bush
Securing ring
Spur Gear 6.4
ADF EJ Front Bush
Hook
Summary of Contents for Artisan 700 Series
Page 7: ...Confidential C H A P T E R 1 PRODUCTDESCRIPTION ...
Page 42: ...Confidential C H A P T E R 2 OPERATINGPRINCIPLES ...
Page 48: ...Confidential C H A P T E R 3 TROUBLESHOOTING ...
Page 189: ...Confidential C H A P T E R 5 ADJUSTMENT ...