Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Revision C
DISASSEMBLY/ASSEMBLY
Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W
191
Confidential
4.3.1.5 Left Housing/Decoration Belt L (Artisan 700/PX700W/
TX700W)
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing/Rear
Left Housing
Removal procedure
1.
Remove the Decoration Belt.
2.
Remove the screws (x2) that secure the Left Housing.
Figure 4-217. Removing the Left Housing/Decoration Belt L (1)
3.
Release the hooks (x3) on the bottom and dowel (x1) on the front side of the
Left Housing, and remove the Left Housing in the direction of the arrow.
Figure 4-218. Removing the Left Housing/Decoration Belt L (2)
C H E C K
P O I N T
The disassembly/reassembly procedures for Artisan 800/PX800FW/
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
4.2.2.7 "Left Housing / Decoration Belt L"
(p109)
for the
procedures.
C.B.A. 3x6 (black)(6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Decoration Belt
Left Housing
C A U T I O N
So as to make description easier, the printer in the photographs is
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
Align and insert the rib in the front inside of the Left Housing to
the inside of the rib of the Base Frame.
Figure 4-219. Installing the Left Housing
Align the positioning hole of the Left Housing with the dowel of
the Base Frame. (See
Fig. 4-218
.)
Left Housing
Hook
Positioning hole
& dowel
The ribs of Left
Housing and the Base
Frame are inside.
Rib of the Base Frame
Rib of the Left Housing
Summary of Contents for Artisan 700 Series
Page 7: ...Confidential C H A P T E R 1 PRODUCTDESCRIPTION ...
Page 42: ...Confidential C H A P T E R 2 OPERATINGPRINCIPLES ...
Page 48: ...Confidential C H A P T E R 3 TROUBLESHOOTING ...
Page 189: ...Confidential C H A P T E R 5 ADJUSTMENT ...