5.
Adjust the edge guides to fit the originals without any gap. Otherwise, the originals may be fed skewed.
Placing Thin Paper
This section describes how to load multiple pieces of thin paper at a time.
Thin paper refers to delicate originals such as extremely thin paper.
Note:
❏
To scan one by one with manual insertion, we recommend that you use
Automatic Feeding Mode(Continuous)
.
❏
To scan thin paper, make the necessary settings in Epson Scan 2.
Open Epson Scan 2. On the Main Settings tab, select
White
as the
Background Color
.
When
Auto Detect
or
Passport
is selected as the
Document Size
, and
Paper Skew
is selected as the
Correct Document
Skew
you cannot select
White
as the
Background Color
.
This section explains how to place the originals when the paper feeding mode is in Delicate Feed as an example.
1.
Set the scanner in the Delicate Feed Position.
2.
Set the feed selector to
(Delicate Feed).
3.
Extend the input tray extension. Pull out the output tray extension to the length of the original. Raise the
stopper if necessary.
>
56
