Placing Envelopes
Note:
❏
Select the appropriate rotation angle in the
Rotate
setting, or select
Auto Rotation
(or
Auto
) in the application for
scanning.
❏
To scan envelopes, specify the necessary settings in the Epson Scan 2 window.
Open the Epson Scan 2 window. Select the
Main Settings
tab >
Detect Double Feed
>
Off
in this order. See the Epson
Scan 2 help for details.
When
Detect Double Feed
in the Epson Scan 2 window is enabled and a double feed error occurs, remove the envelope
from the ADF and reload it. On the control panel, set
DFDS Function
to
On
to disable
Detect Double Feed
for only the
next scan, and then scan again.
DFDS Function
disables
Detect Double Feed
for only one envelope. See Document
Capture Pro help on how to specify the settings of Epson Scan 2 from Document Capture Pro.
This section explains how to place the originals when the paper feeding mode is in Normal Feed as an example.
1.
Set the feed selector to
(Normal Feed).
2.
Pull out the output tray extension and raise the stopper.
3.
While holding the tab, slide the edge guides all the way out.
>
64
