2.
Enter a password to
New Password
and
Confirm New Password
. Enter the user name, if necessary.
If you want to change the password to new one, enter a current password.
3.
Select
OK
.
Note:
❏
To set or change the locked menu items, click
Administrator Login
, and then enter the administrator password.
❏
To delete the administrator password, click
Product Security
tab >
Delete Administrator Password
, and then enter
the administrator password.
Related Information
&
“Running Web Config on a Web Browser” on page 25
Logging on to the Scanner from a Computer
When you log in to Web Config as an administrator, you can operate items that are set in the Lock Setting.
1.
Enter the scanner's IP address into a browser to run Web Config.
2.
Click
Administrator Login
.
3.
Enter the user name and administrator password in
User Name
and
Current password
.
4.
Click
OK
.
The locked items and
Administrator Logout
are displayed when being authenticated.
Click
Administrator Logout
to log off.
Related Information
&
“Running Web Config on a Web Browser” on page 25
Monitoring a Remote Scanner
Checking Information for a Remote Scanner
You can check the following information of the operating scanner from
Status
by using Web Config.
❏
Product Status
Check the status, product number, MAC address, etc.
❏
Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏
Usage Status
Check the first day of scanning, scanning count, etc.
❏
Hardware Status
Check the status of each function of the scanner.
>
>
Checking Information for a Remote Scanner
128