Options and Consumables
159
6
6
6
6
6
6
6
6
6
6
6
Using a Print Server
You can use this printer as a network printer by installing the
EpsonNet 10/100 Base Tx Int. Print Server 5 (C82434
✼
) in the
printer’s parallel interface port. See the Administrator’s Manual
packaged with this option for instructions on installation and
use.
Setting the IP address from the control panel
Follow these steps to get the IP address using the control panel:
1. Turn on the printer.
2. Press the
Menu
(
Tear Off
and
Top of Form
) buttons to enter
SelecType mode.
3. Press the
Item
U
(
Font
) or
Item
D
(
Pitch
) button to select the
Get IP address
setting and set the setting to
Panel
using the
Set
U
(
Tear Off
) or
Set
D
(
Top of Form
) button.
4. Press the
Item
D
(
Pitch
) button to select the
IP byte 1
.
5. Change the number for the
IP byte 1
using the
Set
U
(
Tear
Off
) or
Set
D
(
Top of Form
) button.
6. Press the
Item
D
(
Pitch
) button to select the next byte and
change the number using the
Set
U
(
Tear Off
) or
Set
D
(
Top
of Form
) button.
7. Repeat step 6 until the number for the
IP byte 4
is set.
8. Set the numbers for
SM byte 1
to
4
and
GW byte 1
to
4
as
you did for the IP byte.
9. Confirm the numbers that you selected for the
IP byte 1
to
4
,
SM byte 1
to
4
, and
GW byte 1
to
4
are correctly set.
