Service Manual
General Description
Buttons
■
On
Line
■
Form Feed
■
Manual
(Form Feed +
■
Continue
■
Reset
(Co
■
Menu
■
Tray Select
(Menu+
Item
■
Tray Size
(Item+
■
’r
■
■
Enter
Switches the printer between on-line and off-line mode. While in
mode, this button exits
mode.
When the printer is off line and the Form Feed light is lit, pressing
this button prints out data in the printer’s memory.
Enters directly (short cut) to manual feed; this setting is the same as
the manual setting in the PRINTING MENU of
Pressing this button when the Continue light is flashing clears an
error.
Enter to reset operation; LCD displays “RESET”, printing stops, and
the input buffer of current interface is cleared.
If the RESET button is depressed continuously after “RESET” is
displayed, the message displayed on the LCD changes to “RESET
ALL” (about 5 seconds), and the printer enters to WARM BOOT
operation; printer clears all RAM.
Modifies the function of other buttons.
Enters
mode.
Changes the menu in
mode.
Enters directly (short cut) to the paper tray select setting in CONFIG
MENU of
Enters
mode.
Changes the item in
Enters directly (short cut) to the
TRAY SIZE setting in TRAY
MENU of
Changes to the next available option of
Changes to the previous available option of
Sets available option of
Rev.
1-21
