“
Manual
1.4.3.3 Factory Service Mode
The factory service
mode
is a useful tool for service people. This mode is not available to users. To
enter factory service mode, turn on the printer while hoMing down the On Line,
Feed, and
Continue buttons until “PRODUCT MENU” is displayed. The
settings
shown m
Table
1-13.
Table 1-13. Factory Service Mode
Menu
Available
button)
ad by
button)
ENTER button)
VERSION
CODE ROM
FONT ROM
LL ROM
(Local Language ROM)*
PS
ROM
(Displayed
Module ROM)*
PRODUCT
(Page counter value
CLEAR
(Page
counter
(Note 1)
CLEAR
(Toner left counter clear)
(Jam
value
CLEAR
(Jam counter clear)
* With option
Note 1:
This counter value is
weight
in imaging cartridge.
1.4.3.4 EEPROM Format Mode
EEPROM format operations are required only when the video
board
or
EEPROM is replaced and these operations are specified m the accompanying documentation.
Defaults for the
format functions can be written to EEPROM as follows:
Turn on the printer while holding down the
On Line, Continue,
and Menu
buttons until
“FORMAT=EPL9000” is displayed.
1-26
Rev. A
