General Description
“
1.4.7 Resolution Improvement Technology
The
printers have
(Bi Resolution Improvement Technology), which is designed
to improve print quality at 600
300
By this method, the dot map data extracted from
the image data is reassembled to improve print data.
main improvement of this technique is m
in diagonal lines. It is most
effective when the dot map data fits the development characteristics of the printer mechanism well.
It is therefore necessary to set appropriate values in
inch
I
1 inch
600
(When 600
printing)
Figure 1-14. Effect of
Note:
is not as effective for printing a mesh pattern or gray scale. In such cases,
must be set to OFF. (’The
default setting is MEDIUM.) Since the
effect
depends on the toner condition, it should be adjusted when the imaging cartridge is
replaced or after the imaging cartridge is used for a long time.
following settings are available in
Level for
DARK, MEDIUM, LIGHT, OFF.
When the toner density of area A is almost the same as that of area B (as shown m the figure
below), the
setting is at its optimum setting. In other words, the optimum setting is
achieved when it is difficult to distinguish the shape of area A from that of B.
Figure 1-15.
Adjustment
.
1-32
Rev.
