34
Printing with BLUETOOTH
PictureMate PM 260 / PM 290
Note:
The asterisk is a substitute for the last digit of the
product number which varies by location.
Connecting and disconnecting the
BLUETOOTH Photo Print Adapter
Connecting
1.
Insert the Adapter connector into the EXT. I/F port
as shown below.
c
Caution:
Do not connect this product while the
printer is operating. Doing so may cause
the printer to malfunction.
2.
The Adapter's light comes on for one second. If
the LED does not turn on, disconnect the Adapter
from PictureMate, then reconnect it.
Next, make the settings for BLUETOOTH wireless
communication. See “BLUETOOTH settings” on page
31.
Disconnecting
Remove the Adapter's connector from the EXT. I/F
port.
c
Caution:
❏
Do not remove this product while
communicating with another device.
❏
Do not disconnect this product while the
printer is operating. Doing so may cause
the printer to malfunction.
❏
Do not remove this product by pulling on its
upper section. Doing so may damage the
product.